Skip to main content
615 Asphalt, asphalt paving in Nashville TN 615-431-3789

Decisions

Resurface or Replace? How to Decide for Your Asphalt

An overlay can renew a worn driveway or lot, but only if the base is sound. Here is how to tell which route fits.

2 minute read

Key takeaways

  • Surface wear and fading often respond well to an overlay.
  • Alligator cracking, ruts and sunken areas point to base failure.
  • A repair-and-overlay combination handles many mixed cases.
  • Ask for an inspection before deciding.

Signs resurfacing will work

The pavement is faded or gray, has hairline and small cracks, minor raveling or small isolated potholes. The surface is mostly flat, water drains and the pavement does not flex under weight.

In these cases, repairing the weak spots and placing an overlay can give you a smooth surface that looks and performs like new.

Signs you need replacement or base repair

Interconnected cracks that look like alligator skin, deep ruts, sunken or heaved areas, and spots that bounce when you drive over them all point to base failure.

In these cases, paving over the problem hides it for a short time. Rebuilding the base, either in sections or across the whole area, is the lasting fix.

Mixed conditions

Many pavements have both kinds of areas. A good plan marks the failed sections for full-depth repair and uses an overlay over the rest. Milling can lower the grade first if curbs and doors need clearance.

This approach puts the work where it is needed and avoids replacing good pavement.

How to get a clear answer

An inspection by a paving contractor, including probing weak spots and checking drainage, is the most reliable way to decide. We walk the pavement with you and explain what we see.

If we recommend replacement, we will tell you why, and if an overlay will work, we will say so.

Quick answers

Can an overlay go over cracks?

Small cracks can be sealed before overlaying. Wide cracks and failed areas need repair first or they will reflect through.

Is replacement always more work than overlaying?

Yes, because the old pavement and base are removed. It is also the right choice when the base has failed.

What is mill and overlay?

Milling removes the top layer first, which keeps the finished height the same and removes failing surface material.

Related services

Questions about your project?

Call, text or send the form. Tell us about your property, where it is and what the pavement needs, and we will take it from there.

615-431-3789Text